Changelog
What changed for users in each update, newest first.
2026-11-14
- In the “It surges when I let go of the sticks” demo under “What’s wrong?”, the top speed and coasting distance shown at the end were occasionally smaller than what the aircraft actually did; they now always match.
- English interface: apostrophes and quotation marks no longer have a wide gap after them (for example “What’s wrong?”), and the English interface now uses a standard Latin typeface.
2026-11-10
- When you draw a random airframe, the app now skips the kinds that cannot be tuned to the end in the simulator by following the course (5-inch builds with a very high thrust-to-weight ratio, and hard-difficulty 5-, 22- and 30-inch builds with slow motor response); codes you type in and shared links still give the original aircraft.
- Hard random airframes are now drawn from airframes we have actually tuned to completion in the simulator by following the course, and the weekly challenge aircraft comes from the same list. Normal, easy and codes you type yourself are unchanged.
2026-11-08
- The first time you open the App it asks “What’s wrong with your aircraft?”: pick a symptom, watch a demo aircraft with the same problem, then go to the matching step of the course. You can find it in the “⋯” menu afterwards too.
- The course panel now has a “What’s wrong?” button at the top, so you can open the symptom door and watch a demo at any time.
2026-11-07
- The welcome message no longer flashes over the live messages while the page is still opening.
- Finishing step 8 and the home page after you sign in now offer this week’s challenge airframe; the random airframe dialog and score card show roughly how long QuikTune and AutoTune take on that class.
2026-11-06
- Steps 3 and 7 have a new “Compare: this airframe tuned” button: the coach flies the same 15° stick test twice, once on your current parameters and once on the set tuned by following the course (a temporary boot; your parameters are not changed), and shows overshoot while held, bounce-back, settled wobble, mean attitude error and motor jitter side by side. Only the 10-inch trainer and the 22-inch heavy quad have a reference set.
- The trees and buildings on the practice field have a new look: the three tree types (conifer, broadleaf, poplar) and the two buildings are now more realistic low-poly models, all three quality levels show the same trees, and the frame rate is unchanged.
2026-11-05
- The step 2 drill gains (Rate P, I and D multiplied) are now restored automatically when you leave step 2; a reminder bar shows on steps 3–8 while they are still on; a stick test flown on drill gains is not counted.
2026-11-04
- Switching airframes right after boot now waits for the saved controller calibration and pilot settings to finish writing (up to 5 s) before switching; switching within the first second used to leave some of them out of the old airframe’s parameter file and write the rest to the next one.
- The hover throttle in the comparison table’s “this airframe in the simulator” column is now computed at the battery voltage the log shows at hover; when the log has no voltage record or the cell count differs, the cell says it assumes a nearly full battery.
2026-11-03
- The 22-inch heavy quad now leaves prop debris on the ground when a prop breaks.
- The throttle is now held at minimum while the flight controller boots, then handed back to your controller: a throttle stick left up on an account with a calibrated throttle range used to stall start-up.
2026-11-02
- When the flight controller reports “Potential Thrust Loss”, the message note now explains which motor it is, that it is usually a broken prop or a motor/ESC problem, and that you should land as soon as possible.
- Pressing “Reset to pad” after a damaging landing while the flight controller was still armed showed the broken aircraft for the ten-odd seconds of the restart and looked stuck; the restart now starts with a new aircraft, and the banner explains why it waits and that disarming first avoids the wait.
2026-11-01
- Multirotors now take landing damage like a real aircraft: a hard landing breaks the landing gear, and touching down tilted flips the aircraft or chips a prop tip; with a broken prop it cannot take off, a chipped prop gives less thrust and shakes, the status bar shows what is damaged, and “Reset to pad” gives you a new aircraft. You get a warning before your descent reaches the speed that breaks something.
2026-11-01
- Three notes added to steps 4 and 6: a wider or deeper notch adds more delay; a tune whose D stops at the minimum is not a good tune; redo the stick test if you changed gains in step 5.
2026-11-01
- In the Chinese interface, the Notes column of the full parameter list is now in Chinese: every parameter’s description, options and bits are translated; the parameters used in the course and the most common ones were checked by hand and are marked “Reviewed”, the rest are machine translations. Hover to see the original English.
2026-10-30
- Real flight log comparison is easier to find: it now opens from the end of step 8, the final-parameters window and the home page after you sign in; the “⋯” menu is grouped into tools and settings.
- The cones on the field are now traffic cones with a reflective band.
2026-10-29
- The app's mode bar has a new RTL (return to launch) button, key 4: press it in the air and the flight controller flies back to where it was armed, lands and disarms.
- The Notes column of the full parameter list now shows each parameter’s definition from the ArduPilot parameter documentation: what each option value means (the current one is marked), each bit of a bitmask, or the range and units; hover for the full English description.
- Signing in on the website now happens in place: after signing in you stay on the site, with your name and the button that starts the simulator at the top right.
- The sky has been redrawn: more natural clouds and a light haze at the horizon.
2026-10-28
- The Loiter coordinated-turn option (LOIT_OPTIONS) now defaults to off, matching the latest ArduPilot development builds: holding full pitch and full yaw together and then releasing no longer makes the aircraft speed up before it brakes. Step 8 of the course now explains this parameter.
- Corrected the aircraft’s centre: when it tilts it no longer looks like it swings about a point under the legs; most visible on the heavy quad.
- The 22-inch heavy quad has a new look: a faceted top cover, round-tube folding arms, folding props and two batteries slung under the body.
- The 13-inch aerial quad has a new look.
- The 22-inch heavy quad and the 13-inch quad now carry the TuneKata wordmark too.
- When parked on the landing pad, the aircraft's legs and skids no longer sink into the H.
- Free scope after the trial: you can still fly freely, calibrate the transmitter, set up pilot options and do steps 1 and 2; changing parameters by hand (the parameter list, loading parameter files, AutoTune, QuikTune) is part of the subscription.
2026-10-27
- The 10-inch trainer has a new look: tapered arms, landing pads, battery straps and a GPS mast, with the TuneKata wordmark on the canopy; on the low quality setting the wordmark only shows in the close-up view.
- Steps 3 and 4 of the course now end with an optional quiz: look at a stick-test log or a spectrum flown in the simulator, pick what it shows or how the notch should be set, and get the reasoning straight away; you can keep trying, and finishing it ticks the task.
- The app’s “⋯” menu has a new “Real flight log comparison”: drop in .BIN logs from a real flight controller (up to three at a time) and it lists, step by step along the course, what the log measured, what the course does, and whether each item is within the course range, outside it, or not visible in the log; with one of My airframes selected it also shows the simulator’s prediction for that airframe, each value marked as simulator-only and not for use on a real aircraft. Logs are analysed in the browser only, never uploaded, and nothing is kept once the panel is closed.
- It currently covers ArduCopter 4.6 to 4.8 multirotors only; other firmware or frame types are clearly marked as skipped. Like step 3, it needs an active trial or subscription.
2026-10-26
- TuneKata is now open to everyone: US$14.99 a month or US$119 a year, charged in your local currency; a 7-day free trial for new accounts with all eight steps, and steps 1 and 2 free for good after the trial.
- Launch early-bird pricing for the first 30 days, until 2026-11-26: 10% off the first year of the yearly plan, applied automatically when you subscribe to it.
- The Mission Planner illustrated guide is now in English: “Illustrated guide” next to each step’s “On a real aircraft (Mission Planner)” opens screens retaken and marked in Mission Planner’s English interface. As with the Chinese guide, it is available after signing in, and from step 3 on it needs an active trial or subscription.
2026-10-24
- Each course step’s “On a real aircraft (Mission Planner)” now has an “Illustrated guide” link: real Mission Planner screens with the places to click marked, plus notes. Available after signing in; from step 3 on it needs an active trial or subscription, like the course. Chinese interface only for now.
2026-10-19
- With a real transmitter, the arm switch, emergency-stop switch and flight modes you set up now come with you when you change aircraft. These settings and your radio calibration are also saved to your account, so they are there when you sign in on another computer.
- “Display & sticks” has a new “🔍 Close-up”: a small window at the top right shows the aircraft up close from the pilot’s side with a yellow arrow for the nose, so you can still tell which way it is facing when it is far away.
- The airframe menu has a new “My airframes” section: give an airframe a name, start from the trainer, the heavy or a random airframe (by its code), change its specs in the Physics tab and keep separate flight-controller parameters for each one (up to 20); rename, copy or delete them. Available during the trial, then with a subscription. These values belong to the simulator and must not be used on a real aircraft.
- The practice field has new scenery: three kinds of low-poly trees, a tree line on the horizon, a tent and worn footpaths, plus a fence, distant buildings and varied grass on the High setting. Rendering is also lighter: on computers without a dedicated graphics card, the view now updates more smoothly than before.
- The English interface now translates a batch of text that was still in Chinese: the transmitter auto-setup steps, the per-channel detect prompts, the explanations under flight-controller messages, and more.
- The homepage and FAQ now list the system requirements (minimum and recommended).
2026-10-17
- Every course step now shows where to do it in Mission Planner: a line above the action buttons names the page and button to use on a real aircraft, visible in quick mode too; open “On a real aircraft (Mission Planner)” for step-by-step instructions, procedure only, no values.
- The Extended Tuning panel in the ground-station tools now uses Mission Planner’s block names and layout: the parameter name sits under every box (with the 4.6 name where it differs), each block is tagged with the course step that tunes it, two lines at the top explain the outer and inner loops, and a table maps the panel to the eight steps.
- The five ground-station tool pages now use the site’s colours and match dark mode; field names are no longer cut off.
2026-10-15
- If you flip the AutoTune switch while the coach is hovering, the coach now lets go of the sticks first, so the twitch tests start right away.
- If the flight controller refuses to disarm after touchdown, the message now says it has not registered the landing yet: pull the throttle all the way down and wait 1–2 seconds. Only in the air does it tell you to land first.
- On racing and camera drones the motor colour no longer spreads to other parts; long sessions with many resets to the pad no longer keep using more memory.
- The licences page now has the site navigation and footer; the sign-in screen links to the Terms of Service and Privacy Policy.
2026-10-14
- A tidier layout on laptops: the right panel scrolls on its own, so the 3D view, arm and coach buttons stay on screen; the top bar fits on one line, with display aids, stick mode and language in a new “Display & sticks” menu.
- Flight-controller start-up messages stay in the Messages tab instead of filling the 3D view; after you press the coach’s “Take off & hover” or “Land”, “Do now” asks you to wait instead of asking for a second press.
- On the pricing page, visitors who are not signed in see how to start a trial, and the subscribe buttons say whether you can subscribe right now.
- The pricing page has a “Manage subscription” button: subscribers can change their payment method, see receipts or cancel on Paddle’s subscription page.
- Taking off right after start-up, while the flight controller is still getting its position fix, now gives a steadier AltHold hover.
2026-10-13
- Added an English/中文 language switch.
- The Terms of Service, Cancellation and Refund Policy and Privacy Policy are published (Chinese and English) and linked from every footer; revision dates will be noted at the bottom of each page.
- The tail light is now green; the 22-inch heavy aircraft has side-mounted landing gear and red (front) / green (rear) arm-tip lights.
- Throttle input reaches the flight controller sooner, and the coach’s “Take off & hover” now arms cleanly with a game pad connected.
- Heavy aircraft now yaw no faster than commercial large multirotors.
- Aircraft are easier to orient: orange front arms and props, dark rear arms and a tail light make the heading visible from a distance.
- After you land and disarm, “Reset to pad” no longer restarts the flight controller, so you can take off again almost at once. Use AltHold at first; Loiter opens once the controller has re-aligned its position.
2026-10-12
- The home page, FAQ, changelog and licences page are now public; the app itself remains in closed beta for the trial list, and signing in is unchanged. Please use tunekata.com.
- Visual upgrade: real aircraft shadows, clouds and sharper textures, plus an Auto / Low / Medium / High quality setting in the top-left (Low suits older computers). Quality affects only the picture, not the simulation.
2026-10-11
- The eight-step course has “Start this aircraft over”: it clears this aircraft’s progress and parameters and returns to step 1; other aircraft are not affected.
- With “⌖ Ground marker” on, a top-view minimap shows your position and the aircraft’s track.
- New “⌖ Ground marker” toolbar button: it marks the spot on the ground directly below the aircraft, so you can tell where it is even when it is high up or seen from the pilot view.
- The right-hand panel can be hidden for a wider flight view; the toolbar is more compact on wide screens.
2026-10-10
- The random-airframe dialog is simpler: pick a class and difficulty to see an aircraft right away, swap it or enter a code, then press a single Start button.
2026-10-09
- Step 2 explains how to collect vibration data; each flight’s data is kept separately and step 4 lets you choose which flight to analyse.
- The oscillation drill in step 2 tells you what to do next and shows how long the aircraft has been stable.
- Step 4 (notch filter) is rewritten as an ordered procedure, with “what this step does” separated from “how to do it on a real aircraft”.
- Step 6: evaluate the AutoTune result before saving; the “gain per twitch” chart is now read from the flight-controller log, as on a real aircraft.
- Step 7 adds what to do when the aircraft feels too sharp after AutoTune.
- Landings are more realistic: the flight controller’s sensors now feel hard and tilted touchdowns.
2026-10-08
- The “Do this now” hint is more accurate in steps 6 and 7.
- AutoTune and QuikTune are more robust: stopping mid-way, not finishing and saving are all explained correctly.
- Course tasks, vibration data, transmitter calibration and wind settings stay correct when you change aircraft, reboot or reload.
- Cloud progress syncs correctly when you switch computers or accounts.
- Assorted small improvements: keys, reloading on step 8, Loiter, battery swap, the full parameter table.
- The eight-step course was checked line by line against the ArduPilot source and official documentation, using the current parameter names.
- Steps 4 and 5 add real-aircraft procedures and safety notes.
- Observations made on the simulated aircraft are labelled as such; the English version now also covers the hints and chart labels.
- The free trial is now once per person; the first two steps stay free after the trial; temporary e-mail addresses are not accepted.
2026-10-06
- Step 6: a heavy aircraft completes AutoTune at the default 30° once the notch filter and QuikTune steps are done in order; 45° is now a fallback. Steps 4 and 5 add notes for large-prop aircraft.
2026-10-05
- The built-in 22-inch heavy aircraft has a new specification and will feel different; step 6 adds the AutoTune procedure for heavy aircraft.
- Random and custom airframes now hover closer to a real aircraft; they will feel different from before.
- Clearly stated everywhere: values tuned on the simulated aircraft are for practice only and must not be used on a real aircraft.
- The English name is now TuneKata (formerly CopterDojo); the Chinese name 飛控道場 is unchanged.
- New home page; the FAQ and changelog pages share the new look.
- The address is now tunekata.com; old addresses redirect. Sign in once more after the move.
- The contact address is now support@tunekata.com.
- Each step has a “Do this now” hint; “Show me” highlights what to press.
- Two explanation modes: Quick and Full.
- Problem reports from “✉ Report” in the title bar.
- The home page adds “Why TuneKata exists”; FAQ and changelog pages added.
- The leaderboard shows nicknames you choose.
- The Airframe menu lets you tell us what else you would like to practise on.
- After the trial, the first two steps remain free.
- Fixed the step 2 tick for “disarm right after arming”.
2026-10-02Closed beta begins
- The real ArduCopter flight-controller firmware runs in the browser and all eight official tuning steps can be completed: parameter preparation, initial flight, evaluation, notch filter, QuikTune, AutoTune, feel, Loiter.
- Coach-assisted flying, real transmitters, ground-station tools, flight-controller messages and log download.
- Random airframes: pick a class and difficulty, or enter a 5-character code; Practice and Challenge modes.
- Challenge mode has scores and a leaderboard, a weekly site-wide challenge aircraft, and shareable aircraft links.
- Racing, camera and heavy aircraft each have their own 3D model.
- English version, switchable in the top-right corner.
- Accounts: progress, transmitter settings and flight-controller parameters sync to the cloud; one account on one computer at a time.
- Low battery triggers the flight controller’s failsafe, as on a real aircraft.
- On-screen tour and live messages in the top-right of the flight view.
- The coach can take off with a real transmitter connected, and the view moves back to the pad as soon as you press “Reset to pad”.